Stainless Steel Fixings
Contact Us Compliance Home
Wall Ties
Stone Restraints & Supports
Brickwork Support
Windpost
Expansion Anchors
Channel Supports
Cavity Wall Ties
Wall Ties
Mix & Match
Restraint Fixings
Sliding Brick Anchors
Mesh Beads
Reinforcement
Miscellaneous

Federation Stone Great Britain


SSF Support Systems

Designed to suit site conditions. The range is therefore best specified by using three main variables to calculate your system requirements. Cavity Width, Height of Brickwork and the backing structure Concrete or Steel.

SSF TFS System

One of the most versatile support system available. This system consists of continuous angle with welded support brackets. The support brackets can be standard, inverted, extended and welded at the required centres.

Type

Cavity

Height of
Brickwork

Concrete
or Steel

TFS/50/3.0/C

50mm

3000mm

Concrete

TFS/50/4.5/S

50mm

4500mm

Steel

TFS/75/3.0/S

75mm

3000mm

Steel

TFS/75/5.0/C

75mm

5000mm

Concrete

TFS/100/4.5/C

100mm

4500mm

Concrete

TFS/100/5.0/S

100mm

6000mm

Steel

TFS/100/6.0/S

100mm

6000mm

Steel

SSF TCA System

A continuous angle support system. This system is mainly used for cavities below 50mm. Angles can be manufactured from 3mm to 15mm thick in 3000mm lengths. Angles would be supplied with pre-punched holes, slots and welded serrated patches all depending
on the contract requirements.

TYPICAL SPECIFYING CODES FOR TCA

Type

Cavity

Height of
Brickwork

Fixing
Type

TCA/50/3.0/C

50mm

3000mm

Concrete

TCA/75/4.0/S

75mm

4000mm

Steel

TCA/100/5.0/S

100mm

5000mm

Steel

TCA/100/6.0/C

100mm

6000mm

Concrete

TCA/110/7.5/C

100mm

7500mm

Concrete

   
 
Conditions of Sale